Tesla Powerwall 3 vs. Franklin aPower 2: Which Home Battery Is Right for You?
By Tim McGann of Pristine Panels · Published: October 30, 2026
The Short Answer
Both are excellent home batteries, and we install both. The Tesla Powerwall 3 has a solar inverter built in, so it’s a strong fit for new solar and battery installs. The Franklin aPower 2 stores more energy per unit, carries a longer warranty, and connects to the solar system you already have, so it’s a strong fit for adding storage to existing panels. The right choice depends on your home, your goals and your current setup.
Side by Side: The Key Specs
| Tesla Powerwall 3 | Franklin aPower 2 | |
|---|---|---|
| Energy per unit | 13.5 kWh | 15 kWh |
| Continuous power | Up to 11.5 kW | 10 kW (15 kW peak for 10 seconds) |
| Motor start (large AC units) | 185 LRA | 185 LRA |
| Solar connection | Built in solar inverter, up to 20 kW of solar, 6 solar inputs | Connects to your existing solar inverter (AC coupled) |
| Maximum system size | Up to 4 Powerwall 3 units plus 3 Expansion units | Up to 15 units (225 kWh) per aGate |
| Efficiency | 89% solar to battery to home | 90% round trip |
| Installed weight | About 291 lb | About 357 lb |
| Installation | Indoor or outdoor, wall or floor | Indoor or outdoor, wall or floor |
| Operating temperature | 4°F below zero to 122°F | 4°F below zero to 122°F |
| Warranty | 10 years, with 70% capacity at 10 years | 15 years or 60 MWh of throughput |
Specs come from each manufacturer’s published datasheets and specifications. The two efficiency figures are measured differently, so treat them as roughly equal.
Where They’re Alike
On the basics, these two batteries are closely matched. Both can start a large air conditioner: each is rated for 185 locked rotor amps, and Franklin says a single aPower 2 can start and run a 5 ton AC. Both are rated for indoor or outdoor installation on a wall or the floor, both handle temperatures from 4°F below zero up to 122°F, and both switch your home to battery power automatically when the grid goes down.
For an Augusta home, that means either one can keep your essentials running through a summer storm or a winter ice storm.
The Biggest Difference: How They Connect to Solar
Tesla Powerwall 3 has a solar inverter built in. It can take up to 20 kW of solar across 6 inputs. If you’re installing new solar and a battery together, that means one less piece of equipment on your wall.
Franklin aPower 2 is AC coupled. It works alongside the solar inverter you already have, and Franklin says it’s compatible with all major solar inverters. If you already have solar panels and just want to add storage, the aPower 2 can usually be added without changing your existing system.
Capacity and Expansion
A single aPower 2 holds 15 kWh, compared with 13.5 kWh for a Powerwall 3. That extra 1.5 kWh per unit adds up if you need several batteries.
Both systems can grow. A Powerwall 3 system can have up to 4 Powerwall 3 units plus up to 3 Powerwall 3 Expansion units at 13.5 kWh each, for 7 units in total. A Franklin system can stack up to 15 aPower 2 units, or 225 kWh, on a single aGate. Most homes need far less than either maximum.
Power Output
The Powerwall 3 delivers up to 11.5 kW of continuous power per unit, a little more than the aPower 2’s 10 kW. The aPower 2 can briefly reach 15 kW for up to 10 seconds, which helps with startup surges. For most homes, both provide plenty of power to run essentials, and adding units increases how much you can run at once.
Warranty
This is where the aPower 2 stands out. Franklin warrants the aPower 2 for 15 years or 60 MWh of throughput, and says that’s more than 10,000 cycles. Tesla warrants the Powerwall 3 for 10 years and guarantees it will keep 70% of its capacity at 10 years, with unlimited cycles for normal uses like storing solar and backup power.
Note that Franklin’s aGate, the controller that manages the system, carries its own 12 year warranty.
Smart Home Features
Franklin’s aGate is the brain of its system. It handles switching to battery during an outage, measures solar and grid power, can automatically shed lower priority loads, and offers an optional Smart Circuits module and an optional generator module. If you already own a backup generator or want one in the future, the aGate is built to work with it.
Not Sure Which Battery Fits Your Home?
We install both. We’ll look at your energy use, what you want to keep running during an outage, and whether you already have solar, then recommend the right battery. The consultation is free.
Request Your Free Battery ConsultationWhich One Should You Choose?
The Tesla Powerwall 3 may be the better fit if: you’re installing new solar and a battery at the same time, you want the built in solar inverter, or you want the higher continuous power per unit.
The Franklin aPower 2 may be the better fit if: you already have solar panels and want to add storage, you want more energy per battery, you want the longer 15 year warranty, or you want to connect a backup generator.
Every home is different, and the best choice depends on your roof, your existing equipment and your goals. That’s exactly what we sort out during a consultation.
Frequently Asked Questions
What is the difference between the Tesla Powerwall 3 and the Franklin aPower 2?
The Powerwall 3 stores 13.5 kWh, delivers up to 11.5 kW of continuous power, and has a built in solar inverter. The aPower 2 stores 15 kWh, delivers 10 kW continuous with a 15 kW peak, connects to your existing solar inverter, and carries a 15 year warranty compared with Tesla’s 10 years.
Which battery is better for existing solar panels?
The Franklin aPower 2 is often the easier fit, because it is AC coupled and works alongside existing solar inverters. We check your current setup and will tell you whether a Powerwall 3 is an option for your home too.
Can either battery run my air conditioner during an outage?
Yes. Both are rated for 185 locked rotor amps, and Franklin says a single aPower 2 can start and run a 5 ton AC. How long it runs depends on your usage and how many batteries you have.
Which has the longer warranty?
The Franklin aPower 2, at 15 years or 60 MWh of throughput. The Tesla Powerwall 3 is warranted for 10 years, with 70% of its capacity guaranteed at 10 years.
Does Pristine Panels install both batteries?
Yes. We install both the Tesla Powerwall 3 and the Franklin aPower 2 across Augusta, Evans, Martinez, Grovetown, North Augusta, Aiken and the surrounding area.
Get the Right Battery for Your Home
Whether it’s a Powerwall 3 or an aPower 2, the right battery keeps your home running when the grid goes down and lets you use more of the solar power you make. Call Tim at (762) 320 9290 or request your free battery consultation online.
Get Your Free Battery ConsultationSources
- Tesla: Powerwall 3 Datasheet (North America)
- Tesla: Powerwall 3 Specifications (Installation Manual)
- Tesla: Powerwall 3 Design Considerations (system size limits)
- Tesla: Powerwall 3 Expansion Specifications
- Tesla: Powerwall Limited Warranty (USA)
- FranklinWH: aPower 2 Datasheet
- FranklinWH: aPower 2 Home Battery
- FranklinWH: Components of Franklin Home Power (aPower 2 and aGate)
- FranklinWH: New 15 kWh home battery and 15 year warranty announcement (September 2024)
Specs on this page were checked against manufacturer documents in October 2026. Manufacturers can update specifications and warranties.